3D之家

Product center

Product center

PRODUCT CENTER

3D之家 > Products

Ultrasonic water meter

The ultrasonic water meter adopts the time difference method to measure. Compared with mechanical water meters, it has the characteristics of high accuracy, wide range ratio, low pressure loss, and no moving parts. Its circuit design uses high-precision time measurement chips to improve measurement accuracy. It is highly intelligent and equipped with Multiple electronic remote transmission methods.

Download

1.产品详细资料为PDF文档; 2.下载后若不能打开文档,请先安装PDF阅读器; 3.下载时推荐使用下载工具或目标另存为。 Download tips: 1. Product details are PDF files; 2. If you cannot open the file after downloading, please install PDF reader first; 3. It is recommended to use download tool or save target as download
  • Ultrasonic water meter
  • Ultrasonic water meter
  • Ultrasonic water meter

Product parameters Technical Parameters Selection table

Product introduction

YYC-S series ultrasonic water meter adopts the principle of time difference measurement. Compared with mechanical water meters, it has the characteristics of high accuracy, wide range ratio, low pressure loss, and no moving parts. Its circuit design uses high-precision time measurement chips to improve measurement accuracy and intelligence. High degree, equipped with various electronic remote transmission methods.

Product parameters

Clear digital LCD display for easy reading

Multi-channel structure design to maximize measurement accuracy under various flow conditions

No-reduction tube design, no pressure loss, no moving parts, reduce water supply energy consumption, reduce enterprise water supply costs

With pipe network pressure detection function

Battery-powered, micro-power design, can work continuously for more than 10 years

High measurement stability to meet long-term accurate measurement

Low starting flow (the minimum flow rate that can be monitored is only 0.010m / s), high accuracy

With multiple output functions, optional M-BUS, RS485, GPRS, photoelectric interface and other communication methods can be selected for remote monitoring

Store 730 single-day water consumption data and 24-month cumulative data, data is automatically saved after power failure

Comply with the national standard GB / T 778-2007 of the People's Republic of China "Measurement of water flow in closed pipelines, drinking cold water meters and hot water meters" and the urban construction industry standard CJ / T 434-2013 "Ultrasonic water meters"

Factory inspection is based on the National Metrological Verification Regulations of the People's Republic of China JJG162-2009 "Cold Water Meter"

Application Industry

It is suitable for accurate measurement of urban water supply pipelines and household metering meters. It solves the problems of high starting flow of traditional water meters and small flows that are not measured. It can replace traditional mechanical water meters to reduce the pressure loss of the pipe network and perform intelligent management. It is also suitable for a variety of powerless industrial sites.

Technical Parameters

Accuracy level: Level 1, Level 2

Nominal diameter: DN50-DN300

Pressure loss: Δp10

Pressure Rating of Pipe Section: 1.0Mpa, 1.6Mpa

Working environment: temperature -25 ℃ ~ + 55 ℃; relative humidity ≤100%

Temperature grade: T30, T50, T70 (default is T30)

Upstream / downstream flow field sensitivity level: U5 / D3

Climate and mechanical environmental conditions type: Class C

Electromagnetic compatibility level: E2

Data communication: photoelectric interface, M-BUS, RS485, GPRS

Data storage: 730 single-day water consumption data, 24-month cumulative data and cumulative effective operating time, data is automatically saved after power failure

Working power: 3.6V lithium battery (can work continuously for more than 10 years)

Protection level: IP68

Selection table

25 years quality guarantee

trustworthy

加盟咨询 客户服务 留言板 Customer service message board for national high-tech enterprises joining consulting