3D之家

Product center

Product center

PRODUCT CENTER

3D之家 > Products

Mono ultrasonic flowmeter

The mono ultrasonic flowmeter is a meter that measures the liquid flow in a round pipe based on the "time difference method" as the measuring principle. The high-performance converter based on the MSP430 microprocessor uses advanced signal digital processing technology and integrates multiple output methods.

Download

1.产品详细资料为PDF文档; 2.下载后若不能打开文档,请先安装PDF阅读器; 3.下载时推荐使用下载工具或目标另存为。 Download tips: 1. Product details are PDF files; 2. If you cannot open the file after downloading, please install PDF reader first; 3. It is recommended to use download tool or save target as download.
  • Mono ultrasonic flowmeter

Product parameters Technical Parameters Selection table

Product introduction

The monophonic ultrasonic flowmeter is a meter that measures the liquid flow in a circular tube based on the "time difference method" as the measuring principle. The high-performance converter based on the MSP430 microprocessor uses advanced signal digital processing technology and integrates multiple output methods.

Product parameters

High signal resolution to achieve the best range ratio

Measurement of conductive, non-conductive and special media

Sound conducting single homogeneous liquid

High-precision time measurement

ps-level time measurement capability to ensure measurement accuracy

Multiple output functions

Current, frequency, pulse and relay output function, RS485 communication interface

Built-in heat measurement function

It can collect the temperature difference and calculate the heat through an external pair of PT1000 platinum resistors.

Installing sensors online with pressure

Plug-in sensor with built-in ball valve for continuous flow installation

No pressure loss

Except for small-bore pipe type, other ultrasonic sensors basically do not cause pressure loss

Advanced Power Design

The same power supply terminal can be connected to both DC and AC, supporting 50-264VAC or 21-380VDC

Application Industry

Widely used in tap water, circulating water, industrial water, various fuel oils, various acid and alkali liquid solutions, various chemical agents and so on.

Technical Parameters

Channel type: Mono

Accuracy level: 1.0

Caliber range: DN20 ~ DN2000

Velocity range: 0 to 10 m / s (accuracy range: 0.5 to 8 m / s)

Measurable fluid: a single homogeneous liquid that can conduct sound, solid particle content or bubble content is less than 3%

Sensor type: plug-in type (DN80 ~ DN2000), pipeline type (DN20 ~ DN400), outer clip type (DN20 ~ DN2000),

Output signal: 4-20mA, frequency / pulse, RS485

Working power: 220V.AC ± 10%, 24V.DC ± 10% (hand-held power supply 5V / 1A)

Converter working temperature: -40 ℃ ~ + 60 ℃

Sensor working temperature: -20 ~ + 150 ℃

Protection level: integrated IP67; separate sensor IP68 (5 meters underwater), converter IP67.

Explosion-proof grade: Flameproof Exd IIBT6 Gb

Selection table

25 years quality guarantee

trustworthy

加盟咨询 客户服务 留言板 Customer service message board for national high-tech enterprises joining consulting