3D之家

Product center

Product center

PRODUCT CENTER

3D之家 > Products

Plug-in electromagnetic flowmeter

The plug-in electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field. When a conductive medium flows, an induced voltage is generated. The two electrodes inside the pipe measure the induced voltage produced. The measuring pipe is electromagnetically isolated from the fluid and the measuring electrode by a non-conductive inner lining (rubber, Teflon, etc.).

Download

1.产品详细资料为PDF文档; 2.下载后若不能打开文档,请先安装PDF阅读器; 3.下载时推荐使用下载工具或目标另存为。 Download tips: 1. Product details are PDF files; 2. If you cannot open the file after downloading, please install PDF reader first; 3. It is recommended to use download tool or save target as download
  • Plug-in electromagnetic flowmeter

Product parameters Technical Parameters Selection table

Product introduction

The plug-in electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field. When a conductive medium flows, an induced voltage is generated. The two electrodes inside the pipe measure the induced voltage produced. The measuring pipe is electromagnetically isolated from the fluid and the measuring electrode by a non-conductive inner lining (rubber, Teflon, etc.).

Performance characteristics

Optional mounting ball valve for online disassembly

Measurement section PFA lining design, long-term stability

Optional special filling material, good sealing effect

The stainless steel design of the insert rod prevents rust and corrosion.

low cost

Application Industry

Mainly used for large-caliber low-cost measurement

Technical Parameters

Caliber range: matching A09 converter: DN200-DN500; matching AF3 converter: DN200-DN3000;

Measurable flow velocity: 0.1 ~ 12m / s

Accuracy level: Match A09 converter: 2.5 level Match AF3 converter: 1.5 level

Output signal: Match A09 converter: 4 ~ 20mA, frequency, RS485 Match AF3 converter: 4 ~ 20mA, frequency, RS485, HART, GPRS

Power supply voltage: 220V.AC, 24V.DC

Protection level: IP67

Explosion-proof grade: ExdeiallCT4 ~ CT6 Gb; ExdiambllCT4 ~ CT6 Gb

Selection table

25 years quality guarantee

trustworthy

加盟咨询 客户服务 留言板 Customer service message board for national high-tech enterprises joining consulting