3D之家

Product center

Product center

PRODUCT CENTER

Home > Products

Frequency conversion electromagnetic flowmeter

AJ3 variable frequency electromagnetic flowmeter is an electromagnetic flowmeter for measuring slurry and low conductivity. The signal resolution is high, and the highest accuracy is 0.3. The general electromagnetic flowmeter is applied to flow measurement of slurry or low conductivity, and the signal noise is large and the signal is unstable. The AJ3 electromagnetic flowmeter is driven by its excellent high frequency excitation to meet the requirements of high slurry measurement and low conductivity.

Download

1.产品详细资料为PDF文档; 2.下载后若不能打开文档,请先安装PDF阅读器; 3.下载时推荐使用下载工具或目标另存为。 Download tips: 1. Product details are PDF files; 2. If you cannot open the file after downloading, please install PDF reader first; 3. It is recommended to use the download tool or save target as download
  • Frequency conversion electromagnetic flowmeter

Product parameters Technical Parameters Selection table

Product introduction

AJ3 variable frequency electromagnetic flowmeter is an electromagnetic flowmeter for measuring slurry and low conductivity. The signal resolution is high, and the highest accuracy is 0.3. The general electromagnetic flowmeter is applied to flow measurement of slurry or low conductivity, and the signal noise is large and the signal is unstable. The AJ3 electromagnetic flowmeter is driven by its excellent high frequency excitation to meet the requirements of high slurry measurement and low conductivity.

Performance characteristics

High measurable pulp concentration: up to 20%

High signal resolution for best range ratio

Frequency conversion technology, automatically adjusting the excitation frequency based on noise

Strong anti-noise interference ability, can measure high concentration slurry and low conductivity liquid.

4-level menu structure for easy operation

Full dot matrix LCD screen (128 × 64)

Rich self-diagnostic functions

Multiple flow units available

Positive and negative cumulative, positive and negative instantaneous flow and more

Application Industry

Water and wastewater treatment

Chemical and pharmaceutical industries

Food and beverage industry

Mining, concrete and cement industries

Pulp and paper industry

Metallurgical industry

Technical Parameters

Caliber range: DN8 ~ DN300

Measurable flow rate: 0.01 ~ 12m / s

Accuracy level: 0.3 level, 0.5 level

Conductivity:> 1μs / cm

Concentration of pulp (pulp): <20% (weight ratio)

Output signal: 4 ~ 20mA, frequency, RS485, HART, GPRS

Power supply voltage: 220V.AC, 24V.DC

Protection level: integrated IP67, separated IP68

Explosion-proof grade: ExdeiallCT4 ~ CT6 Gb; ExdiambllCT4 ~ CT6 Gb

Self-diagnostic function: empty pipe and electrode impedance detection, noise signal, 50Hz interference diagnosis, single electrode state diagnosis, etc.

Selection table

25 years quality guarantee

trustworthy

加盟咨询 客户服务 留言板 Customer service message board for national high-tech enterprises joining consulting